Digital Barometric Sensor Module BMP180

Description

BMP180 Digital Barometric Sensor Module

This precision sensor from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter! The sensor is soldered onto a PCB with a 3.3V regulator, and pull-up resistors on the I2C pins. The BMP180 is the next-generation of sensors from Bosch, and replaces the BMP085. The good news is that it is completely identical to the BMP085 in terms of firmware/software/interfacing – you can use any example code/libraries for BMP085 as a drop-in replacement.

Technical Specifications

• Vin: 2.0 to 5VDC
• Logic: 1.8V / 3.3V compliant
• Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
• Up to 0.03hPa / 0.25m resolution
• -40 to +85°C operational range, +-2°C temperature accuracy
• This board/chip uses I2C 7-bit address 0x77.

Documents and Downloads

• BMP180 Datasheet
• Arduino BMP180 library
• BMP180 / GY-68 Module Schematic
• Arduino Interfacing Example

Package Includes

• 1x BMP180 / GY-68 Module