STM32F103ZET6 Development Board


14 People watching this product now!




The STM32F103ZET6 performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN. The STM32F103ZET6 operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications. These features make the STM32F103ZET6 high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC. The development board of STM32F103ZET6 provide convenience to your development work. It’s cheap and nice appearance.


1. CPU: STM32F103ZET6, LQFP144, FLASH: 512K, SRAM: 64K; External expansion SPI FLASH: W25Q64, 8M bytes
2. One Power Indicator
3. Two Status indicator
4. One EEPROM chip, 24C02, the capacity of 256 bytes
5. One Photosensitive sensor
6. One wireless module interface, can be accessed NRF24L01 / RFID / CC01 module
7. One channel CAN interface, using TJA1050 chip
8. One 485 interface, using SP485 chip
9. One standard 2.4/2.8/3.5/4.3/7inch LCD interface, support for touch screen
10. A USB serial port, can be used for program download and code debugging (USMART debugging)
11. One USB SLAVE interface for USB communication
12. One reset button
13. Two independent keys
14. One SD deck, used to access SD card
15. One RTC backup battery holder
16. One standard JTAG / SWD simulation download debugging interface
17. 5V to 3.3V circuit
18. Chip pin 144 feet all leads;convenient external expansion experiment
19. One power switch, used to switch USB power
20. Size: 10cm x 8cm


  • PCB size : 85x75mm
  • Chip Pin Count : 144P
  • Operating Frequency: 72 MHz
  • 16-bit timer 4
  • Voltage (V) :2 to 3.6
  • RAM (Bytes) :64 K
  • Program Memory Type: Flash
  • Prog. (Bytes) 512 K

Package list

STM32F103Z R1.1 core board(DOES NOT CONTAIN BATTERY) x 1



Customer Reviews

0 reviews

There are no reviews yet.

Be the first to review “STM32F103ZET6 Development Board”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5