WeMos D1 mini Pro – ESP8266 based WiFi Module
D1 MINI-PRO
D1 Mini Pro Board with 16 MB flash memory and ESP8266 chipset. The board can be programmed with Arduino IDE, has the CP2104 USB chipset and allows easy and fast creation of IoT devices.
Technical data • 11 digital input pins
• all pins have interrupts
• PWM/I2C & One-Wire Support
• 1 Analog input (max. 3.3 V)
• 16 MB Flash
• onBoard WiFi antenna
• u.FL antenna socket for the connection of an external antenna
• microUSB connector
• CP2104 UART – USB Converter
Note:To use the external U.FL antenna socket, a jumper must be moved. See Figure 4
Scope of delivery
1x D1 Mini Board
2x pin header short
2x pin header long
2x female connector strip
Technical Details
- General
-
- Type
- D1
- Category
- Board
- Design
- Standard
- Model
- ESP8266
- Analog inputs
- 1
- Clock
- 160 MHz
- Bit
- 32
- SD card
- No
- Implementation
-
- Microcontrol
- Tensilica LX106
- Flash
- 96 KB
- SRAM
- 64 KB
- EEPROM
- –
- Electrical values
-
- Voltage
- 5 V
- Interfaces
-
- with PWM
- 2
- USB
- Yes
- SPI
- No
- I²C
- Yes
- ICSP
- No
- TWI
- No
- UART
- Yes
- CAN
- No
- SAC
- No
- LAN
- No
- Bluetooth®
- No