The Raspberry Pi 3 3B+ Acrylic Case is made of 2-piece ABS plastics which provides adequate protection for your Pi and access to all the ports. A mini cooling fan can be mounted inside the case for good thermal management.
The case has slots at the sides so that you can route GPIO and CSI ribbon cable. At the back of the case, there are two mounting holes, 4 anti-slip rubber feet, and a cut-out to facilitate the micro SD card insertion and removal. This case is also designed so that you can see the Pi status LEDs clearly.
The fan is mounted with 2 screws on the inside of the top panel. The position is directly above the main chip which is one of the most significant heat sources from the Pi. With the fan mounted, there is still some space to attach a heatsink on the chip for better heat dissipation.
Note: The product package doesn’t include any Raspberry Pi Board and Also a Cooling Fan, you need to buy it separately. Check our raspberry category for more products
- 2-piece Acrylic ABS case with a mini cooling fan mounted inside
- All ports are accessible
- Slots to route GPIO and CSI ribbon cable
- Cut-out for micro SC card at the bottom panel
- Mounting holes and anti-slip rubber feet at the back
|Compatibility||Raspberry Pi 3/3B+|
|Dimensions in mm (LxWxH)||91 x 66 x 30|
|Case Attaching Screw Dia. (mm)||M2|
|Shipment Weight||0.047 kg|
|Shipment Dimensions||8 × 6 × 4 cm|
Package Includes :
2 Pieces Acrylic ABS plastic case
4 x screws to secure the case together
A set of anti-slip rubber feet