CJMCU-101 is an integrated photodiode and transimpedance amplifier which out chip inside. For putting integrated photodiode and transimpedance amplifiers in a single chip, it can prevent common problems in discrete designs. Such as leakage current error, noise and gain peaks caused by stray capacitance. One advantage of the sensor is that the amplifier is single or dual power supply design, which can working on battery equipment. When the photodiode works in the photoconductive mode, it has a good linearity and low dark current.
The sensor can be used on smoke detectors, currency changers, barcode scanners. It also can be applied on medical instrumentation, laboratory instrumentation and photographic analyzers.
The OPT101 is a monolithic photodiode with on-chip transimpedance amplifier. The ingrate combination of photodiode and transimpedance amplifier on a single chip eliminates the problems commonly encountered in discrete designs, such as leakage current errors, noise pick-up, and gain peaking as a result of stray capacitance. Output voltage increases linearly with light intensity. The amplifier is designed for singlr or dual power-supply operation.
Position and Proximity Sensors
- Operating on the battery equipment .
- Quiescent current is low.
- Amplifier is designed for single or dual power-supply operation.
|Size of photodiode:||2.29mm x 2.29mm|
|Internal feedback resistor:||1MΩ|
|Low quiescent current:||120uA|
|Shipment Weight||0.005 kg|
|Shipment Dimensions||3 × 3 × 3 cm|
Package Includes :
1 x CJMCU-101 OPT101 Analog Light Sensor Intensity Module